- 【2 GROUP LIGHTS & CVT ADJUSTABLE BRIGHTNESS】There are 2 groups lights of this smart mashroom alarm clock light .
- 【Smart Motion&Vibration Sensor Technology】The special design and advanced sensor technology could detect your movement.
- 【ECO-FRIENDLY MODERN DESIGN & NICE GIFT,2000mAh Capacity&USB Rechargeable】- Sustainable lighting 168H(low brightness),8H(High brightness).
- 【SLEEP ASSISTANT ,1-30min Snooze Function】- You can set up the snooze mode to any length between 1min to 30min, set up to 0min means turning it off. : Both time and lights off No one in room or quite night. Automatic sleep recognition
- 【Specifications】: Battery Capacity: 2000mAh/5V ,Color Temperature: 3200K with Warm Light ,Full Charge Last Time: High light 8 hours; Low light 168 hours ,Type of Setting: Touch Control Setting, Size: 5*4.3*2.3in, Package Includes: 1x Alarm Clock, Night Light 1x USB Cable 1x User Manual
1. Set up Time:
01.Long press the K3 button on the right till 01 is displayed
02. Short press the K2 in the middle to enter hour flashing
03. Short press the K1 or K3 to adjust the hour. Press K1 to increase and K3 to decrease.
04. Short press the K2 button in the middle to switch into minute adjustment
05. Short press the K1 or K3 to adjust the minute. Press K1 to increase and K3 to decrease.
06. Short press the K2 to save and exit
2.Set up Alarm:
01. Long press the K3 button on the right till 01 is displayed
02. Short press the K3 button on the right and 02 is displayed
03. Short press the K2 button in the middle to enter settings. Follow the same steps as time setting.
3.Set up snooze (30 minutes maximum)
01. Long press the K3 button on the right till 01 is displayed
02. Short press the K3 button on the right twice and 03 is displayed
03. Short press the K2 button in the middle to enter settings. Press K1 to increase and K3 to decrease. After the setting is done, press the K2 to save and exit.
4.Set Alarm Ring (Three music pick one )
01. Press right button K3 for a long time until present “01”
02. And then press the right button three times until present “04”
03. Enter into setting interface after short press of the middle button K2, set K3 as a next song, Las step, press button K2 and then save and logout after you finished all the setting
5. Adjust the LED Light brightness
It is recommended to adjust the brightness in complete darkness to acquire the desired brightness in the night.
01.Long press the K1 button on the left to adjust the brightness of the luminous ring
02.Short press the K1 button on the left to turn on the normally on mode
03.Long press the K2 button in the middle to adjust the brightness of the mushroom bell
04.Short press the K2 button in the middle to turn off the light